5A switching regulator with Adjustable Current Limit
LM26795A Step-Down Voltage Regulator
with Adjustable Current Limit
DescriptionThe LM2679 series of regulators are monolithic integrated
circuits which provide all of the active functions for a stepdown
(buck) switching regulator capable of driving up to 5A
loads with excellent line and load regulation characteristics.
High efficiency (>90%) is obtained through the use of a low
ON-resistance DMOS power switch. The series consists of
fixed output voltages of 3.3V, 5V and 12V and an adjustable
output version.
The SIMPLE SWITCHER concept provides for a complete
design using a minimum number of external components. A
high fixed frequency oscillator (260KHz) allows the use of
physically smaller sized components. A family of standard
inductors for use with the LM2679 are available from several
manufacturers to greatly simplify the design process.
Other features include the ability to reduce the input surge
current at power-ON by adding a softstart timing capacitor to
gradually turn on the regulator. The LM2679 series also has
built in thermal shutdown and resistor programmable current
limit of the power MOSFET switch to protect the device and
load circuitry under fault conditions. The output voltage is
guaranteed to a ±2% tolerance. The clock frequency is
controlled to within a ±11% tolerance.
Features- Efficiency up to 92%
- Simple and easy to design with (using off-the-shelf
external components)
- Resistor programmable peak current limit over a range
of 3A to 7A.
- 120 mΩ DMOS output switch
- 3.3V, 5V and 12V fixed output and adjustable (1.2V to
37V ) versions
- ±2%maximum output tolerance over full line and load
conditions
- Wide input voltage range: 8V to 40V
- 260 KHz fixed frequency internal oscillator
- Softstart capability
- −40 to +125°C operating junction temperature range
Hiç yorum yok:
Yorum Gönder